跳转到主要内容
超重型 JUMBO™ CC-S ®畚斗是 CC-S 性畚斗的超重型型号，也是 4B 高效畚斗的一种
特别适用于最严苛的应用场合，包括转运码头、酒精厂和高磨蚀性物料
JUMBO™ CC-S ®畚斗能提供业界能力最强悍、最厚的前唇和边角厚度。独有的 "Iceberg"™ 前唇设计大大减轻了对物料的冲击和损害，具有更长寿命。具有与 CC-S 一样的几何形状和能够堆叠的设计特点，大大降低了存储空间和运输成本。
JUMBO™ CC-S ® 畚斗只选用业界等级最高的原生HDPE原料（也有尼龙和聚氨酯），只为产品最高的强度和耐受力。
- 超级坚固和弹性
- 最厚的前唇、边角设计，最长的寿命
- "Iceberg"™ 唇边设计，铲料动作更柔和、物料破损更少，寿命更产
- 可堆叠的设计大大降低了中存储空间和运输成本
- 收敛的底部形状使垂直方向上的畚斗间距更小（每米可布置4.6个畚斗)
Specifications
| JCC-S Bucket | A | B | C | D | T | Weight | Capacity (L) | Capacity (L) | Capacity (L) | Holes | E | F | G | Max | |
| (mm) | (mm) | (mm) | (mm) | (mm) | (kg) | Z2 (total) | Z3 +10% | Z3 (water) | No. | (dia mm) | (mm) | (mm) | Pcs/Mtr | ||
| JCC-S 14x8 | 377 | 234 | 211 | 148 | 13 | 2.2 | 9.47 | 8.14 | 7.4 | 5 | 11 | 75 | 60 | 4.6 | |
| JCC-S 16x8 | 432 | 234 | 211 | 148 | 13 | 2.42 | 10.92 | 9.41 | 8.55 | 6 | 11 | 70 | 60 | 4.6 | |
| JCC-S 18x8 | 483 | 234 | 211 | 148 | 13 | 2.7 | 12.42 | 10.7 | 9.73 | 5 | 11 | 95 | 60 | 4.6 | |
| JCC-S 20x8 | 534 | 234 | 211 | 148 | 13 | 2.86 | 13.83 | 11.94 | 10.85 | 6 | 11 | 90 | 60 | 4.6 | |
| JCC-S 22x8 | 585 | 234 | 211 | 148 | 13.5 | 3.26 | 15.16 | 13.08 | 11.89 | 6 | 11 | 100 | 60 | 4.6 | |
| JCC-S 24x8 | 634 | 234 | 211 | 148 | 13.5 | 3.52 | 16.51 | 14.26 | 12.96 | 7 | 11 | 90 | 60 | 4.6 |
Downloads
FAQ's
Is the JUMBO CC-S interchangeable with the CC-S heavy duty bucket?
The JUMBO CC-S shares the same bolt hole patterns as the CC-S heavy duty bucket. Therefore, is it directly interchangeable with the CC-S as well as most other brands of elevator buckets. In some cases, due to its extra capacity and material weight, elevator belt PIW rating, pulley shaft diameters and motor HP may have to be upgraded. Check with the 4B engineering department if you are uncertain about your existing elevator leg's ability to accept the JUMBO CC-S.
FAQ - Elevator Buckets
What is a HIGH EFFICIENCY elevator bucket?
HIGH EFFICIENCY elevator buckets incorporate all five of the following characteristics: a smooth interior front face with no "breaks", wing-less side walls, close vertical placement on the elevator belt, a tapered bottom and the ability to nest for shipping and storage. For more details, CLICK HERE
Why use Low Profile elevator buckets?
Low profile elevator buckets are created to achieve the closest vertical spacing possible on the elevator belt, thereby optimizing the system for the greatest potential capacity. Some styles of elevator bucket require modification and others are low profile by standard design. Wet or sluggish inputs do not generally load and discharge well in low profile buckets. Due to the extra capacity that is generated and the weight of the additional buckets and material, belt PIW rating, pulley shaft diameters and motor HP may have to be upgraded. Check with 4B engineering department about the best way to get the most capacity out of your elevator leg.
Why add vent holes to the bottom of an elevator bucket?
When elevating fluffy or powdery materials, vent holes in the bottom of the elevator bucket allow it to fill and discharge more efficiently. As material enters the bucket, it encounters a pillow of air resting in the bottom. Vent holes provide an escape path for this pillow of air, so that the entering material does not bounce out of the bucket and back down the elevator leg casing. Upon discharge, the vent holes allow air to re-enter the bucket at the material exits, releasing any vacuum that might hold it the bucket too long, creating down legging.
Are CC style elevator buckets interchangeable with Starco elevator buckets?
Starco elevator buckets have a special shallow geometry and are intended to be placed extremely close together on the elevator belt. Therefore, you should check with the 4B engineering department before replacing Starco elevator buckets with any other brand or design.
How long of an elevator bolt do I need?
When installing buckets on an elevator belt, use this simple formula:
(belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)
What is a "digger" bucket?
Some materials can form a hardened crust along the side wall of the elevator boot, and powders sitting over time can become rock hard. Both of these issues can cause premature elevator bucket wear. Digger buckets are designed to have slightly more width and projection than standard buckets, thereby "digging" through or breaking apart the hardened material, helping to prevent added wear to the standard buckets. Digger buckets are traditionally made from steel, however nylon buckets may also be used depending on the application.
How many digger buckets do I need?
For most applications, use one digger bucket for every nine standard buckets.
Can I use buckets on an overlap splice?
An overlap splice doubles the thickness of the belt, so a bucket's projection will increase on the overlap. Usually this will not cause a problem, but if it does, you can use buckets with one inch less projection or cut the tip of each bucket by half an inch on the spliced area.
When using an overlap splice, how much extra belt should I use for the splice?
The length of the splice should be three times the width of the belt.
How often should I replace head pulley lagging?
Lagging should be replaced every time the elevator belt is replaced.
Images
Videos
Design Services
斗提机设计服务
斗提机设计服务
4B 迄今为止已为各行各业设计了数百种斗提机，包括动物饲料、粮食储运加工、面粉加工、麦芽酿酒行业到水泥、煤炭和其他重工业。
得益于 4B 的深厚技术储备和全球范围的广泛应用经验，我们的工程师精于计算设计各种斗提机。只要您能提供关键指标，我们的工程师就能为您提供详细的设计细节，达到最理想的生产能力和卸料特性。我们既可以为您设计全新的斗提机系统也可以改造提升现有的斗提机系统，达到节能降耗，提高效率的目的。
获得免费的斗提机计算数据
为了我们能更有效地处理您的需求，请尽可能准确地输入这个表格里的各项参数。
4B 迄今为止已为各行各业设计了数百种斗提机，包括动物饲料、粮食储运加工、面粉加工、麦芽酿酒行业到水泥、煤炭和其他重工业。
得益于 4B 的深厚技术储备和全球范围的广泛应用经验，我们的工程师精于计算设计各种斗提机。只要您能提供关键指标，我们的工程师就能为您提供详细的设计细节，达到最理想的生产能力和卸料特性。我们既可以为您设计全新的斗提机系统也可以改造提升现有的斗提机系统，达到节能降耗，提高效率的目的。
获得免费的斗提机计算数据
为了我们能更有效地处理您的需求，请尽可能准确地输入这个表格里的各项参数。
