FANG - pultit
FANG elevator bolts
Product Features
  • teräs
  • ainutlaatuinen muotoilu - hammastus lukitsee pultin paikoilleen, kun mutteri kiristetään
  • läpimitaltaan iso pultin kanta
  • tasainen kanta - vähentää pultin pois repeytymisen vaaraa
  • laajasti testattu ja käytetty USA:n viljateollisuudessa
fang-bolt-measurement
Fang Size Size Head Diameter Max. Torque Package Quantity Package Weight
(mm) (in.) (mm) (Nm) (kgs)
M6 x 20 1/4 x 3/4* 25 11 100 1.56
M6 x 25 1/4 x 1 25 11 100 1.82
M8 x 25 5/16 x 1* 30 27 100 2.76
M8 x 30 5/16 x 1-1/4 30 27 100 3.02
M8 x 40 5/16 x 1-1/2 30 27 100 3.24
M10 x 30 3/8 x 1-1/4 35 37 100 4.90
M10 x 35 3/8 x 1-1/3 35 37 100 5.12
M10 x 40 3/8 x 1-1/2 35 37 100 5.34
M10 x 45 3/8 x 1-3/4 35 37 100 5.56

Standard zinc plated; self colour and stainless options on request.

Literature Downloads

Elevaattoripultit - TARVIKKEET

Nuts, Spacers, Washers
Elevaattoripultit - TARVIKKEET
  • teräs / ruostumaton teräs 316
  • iso, ovaali aluslevy
  • mm-mitoitetut itselukittuvat Nylon-mutterit (DIN 985)
  • itselukittuvat BSW Nylon-mutterit (P-malli)
  • kuusikulmaiset lukkomutterit
  • Iso korinaluslevy
  • HDP-aluslevy
  • Kumialuslevyt
PRODUCT DETAILS

Is the installation of fang bolts any different to other elevator bolts?

Fanged bolts are a little more unique than other elevator bolts.  Install fanged bolts with fang tips in-line across the  
  width of the belt.  Placing the fangs in such a manner minimizes stresses caused by the flat head going  
  around the curved pulley.  Set the fangs into the belt cover by tapping them with a mallet.  Once the bolt is tightened, the  
  fangs will draw up into the belt and the head will seat properly.