Fang 螺栓
带牙斗提机畚斗螺栓

这种螺栓最大特征就是带有2颗尖牙,目的是能穿透皮带的芯层。螺栓上的尖牙咬进皮带,能有效防止拧紧螺栓时的转动

FANG elevator bolts
Product Features
  • 钢制螺栓,独特的设计---尖牙能咬进皮带防止拧紧螺母时发生转动
  • 大直径螺栓头设计
  • 平头设计,防止螺栓头被拔出皮带孔
  • 美国粮食行业深入验证和广泛应用
  • 不论畚斗孔周边有没有凹陷都可以用
  • 螺栓尺寸:M6, M8, M10
Bolt Material
不锈钢螺栓
钢制螺栓(本色定制)
钢制螺栓(镀锌)
    fang-bolt-measurement
    Fang Size Size Head Diameter Max. Torque Package Quantity Package Weight
    (mm) (in.) (mm) (Nm) (kgs)
    M6 x 20 1/4 x 3/4* 25 11 100 1.56
    M6 x 25 1/4 x 1 25 11 100 1.82
    M8 x 25 5/16 x 1* 30 27 100 2.76
    M8 x 30 5/16 x 1-1/4 30 27 100 3.02
    M8 x 40 5/16 x 1-1/2 30 27 100 3.24
    M10 x 30 3/8 x 1-1/4 35 37 100 4.90
    M10 x 35 3/8 x 1-1/3 35 37 100 5.12
    M10 x 40 3/8 x 1-1/2 35 37 100 5.34
    M10 x 45 3/8 x 1-3/4 35 37 100 5.56

    Standard zinc plated; self colour and stainless options on request.

    Elevator Bolt Hardware

    Nuts, Spacers, Washers
    Elevator Bolt Hardware

    Along with the various types and sizes of elevator bolts, 4B offers all of the hardware required for each fastener.         
    For more information on all elevator bolt hardware specifications, see our full bolt catalogue by clicking the link below.

    产品细节

    Is the installation of fang bolts any different to other elevator bolts?

    Fanged bolts are a little more unique than other elevator bolts.  Install fanged bolts with fang tips in-line across the  
      width of the belt.  Placing the fangs in such a manner minimizes stresses caused by the flat head going  
      around the curved pulley.  Set the fangs into the belt cover by tapping them with a mallet.  Once the bolt is tightened, the  
      fangs will draw up into the belt and the head will seat properly.
         
     
     

    FAQ - Elevator Bolts

    FAQ - Elevator Bolts

    How long of an elevator bolt do I need?  
      When installing buckets on an elevator belt, use this simple formula:  
      (belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
         
    What grade are 4B elevator bolts?  
      4B elevator bolts meet or exceed ISO Grade 5.8 / SAE Grade 2 standards.  The bolt grade guide below is for bolt diameters of 6mm (1/4") to 12mm (1/2"):  
         
    BOLT GRADE GUIDE:

    ISO Grade SAE Grade Min. Tensile Strenghth (psi)
    5.8 2 74000
    8.8 5 120000
    10.9 8 150000


    What torque setting should I use?  
      An ideal installation will result in the elevator bolt head fitting snuggly just below the surface of the belt after tightening (Image B).  However, never exceed the maximum recommended torque as shown in the tables below:  
         
    MAXIMUM RECOMMENDED TORQUE FOR 4B ELEVATOR BOLTS METRIC ISO GRADE 5.8

    Bolt Dia. in. lbs. ft. lbs. nm
    M6 72 6 8
    M7 115 10 13
    M8 168 14 19
    M10 336 28 38
    M12 588 49 66


    MAXIMUM RECOMMENDED TORQUE FOR 4B ELEVATOR BOLTS SAE GRADE 2 OR 302 STAINLESS STEEL

    bolt dia. in. lbs. ft. lbs nm
    1/4" 72 6 8
    5/16" 156 13 18
    3/8" 276 23 31
    1/2" 684 57 77

     

    How do you install an elevator bolt?  
      The head of the elevator bolt should lie against the inside surface of the elevator belt with the nuts and washers on the inside of the elevator bucket.  An ideal installation will result in the elevator bolt head fitting snuggly just below the surface of the elevator belt.    
         
       Overview        installations


         
      Do you have any maintenance recommendations?  
      After initial installation, it is recommended that the bucket elevator be run for approximately four hours.  After which the bolts should be re-tightened to ensure that there are no loose parts.  Periodic inspections are always recommended to  check for any issues that may occur during the life of the elevator, including checks for loose or damaged elevator bolts.  

    斗提机设计服务

    斗提机设计服务

    4B 迄今为止已为各行各业设计了数百种斗提机,包括动物饲料、粮食储运加工、面粉加工、麦芽酿酒行业到水泥、煤炭和其他重工业。

    得益于 4B 的深厚技术储备和全球范围的广泛应用经验,我们的工程师精于计算设计各种斗提机。只要您能提供关键指标,我们的工程师就能为您提供详细的设计细节,达到最理想的生产能力和卸料特性。我们既可以为您设计全新的斗提机系统也可以改造提升现有的斗提机系统,达到节能降耗,提高效率的目的。

    获得免费的斗提机计算数据

    为了我们能更有效地处理您的需求,请尽可能准确地输入这个表格里的各项参数。

    4B 迄今为止已为各行各业设计了数百种斗提机,包括动物饲料、粮食储运加工、面粉加工、麦芽酿酒行业到水泥、煤炭和其他重工业。

    得益于 4B 的深厚技术储备和全球范围的广泛应用经验,我们的工程师精于计算设计各种斗提机。只要您能提供关键指标,我们的工程师就能为您提供详细的设计细节,达到最理想的生产能力和卸料特性。我们既可以为您设计全新的斗提机系统也可以改造提升现有的斗提机系统,达到节能降耗,提高效率的目的。

    获得免费的斗提机计算数据

    为了我们能更有效地处理您的需求,请尽可能准确地输入这个表格里的各项参数。

    详细联系方式

    斗提机细节描述

    如果您希望跟随报价一起收到技术图纸或文件,请将您的询价发送到 4b-uk@go4b.com.

    验证码
    This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.