Godet Super Starco™ (SPS) - Acier
Godet d'élévateur type SPS

La nouvelle gamme de godets Super Starco™ est le résultat d’une recherche approfondie afin d’obtenir le maximum de capacité par godet, tout en maintenant les caractéristiques parfaites de remplissage et de déchargement du godet Starco™ original, dans une large gamme de vitesse.

SPS steel elevator bucket
Product Features
  • Plus de 35 modèles disponibles
  • Augmentation du volume avec les mêmes qualités du godet Starco™
  • Moins de godets au mètre
  • Moins de boulons
  • Moins de perçage
  • Et un coût de montage réduit
Material
Inox,
Acier
Use by Industry
Agriculture,
Industrie
Use by Product
Céréales,
Pellets & Produits légers,
Produits collants,
Ciment,
Industrie légère,
Industrie lourde
    sps-steel-line-art
    SPS Bucket A B C D T/Kg T/Kg T/Kg T/Kg T/Kg T/Kg Cap. (L) Cap. (L) Holes E F G Max.
    STEEL (mm) (mm) (mm) (mm) 1.0mm 1.2mm 1.5mm 2.0mm 2.5mm 3.0mm Z2 (total) Z3 (water) No. (dia mm) (mm) (mm) Pcs/Mtr
    SPS 80-80 85 80 58 39 0.11 0.21 0.18 2 8 43 16 15
    SPS 100-90 106 89 66 45 0.12 0.18 0.4 0.33 0.25 2 8.5 50 20 14
    SPS 100-100 105 97 78 46 0.18 0.42 0.29 2 8.5 50 25 12
    SPS 120-100 125 105 77 53 0.22 0.33 0.58 0.44 2 8 67 25 12
    SPS 140-110 146 112 91 40 0.43 0.76 0.41 2 8.5 70 25 10.5
    SPS 130-120 138 120 90 62 0.3 0.38 0.83 0.65 2 8.5 70 25 10.5
    SPS 140-120 146 120 90 62 0.4 0.8 0.87 0.65 2 8.5 70/86* 25 10.5
    SPS 160-140 166 147 112 78 0.55 0.73 1.1 1.58 1.2 2 8.5 100 30 8.6
    SPS 180-140 187 147 112 78 0.61 0.81 1.22 1.75 1.35 2 8.5 100 30 8.6
    SPS 200-150 205 150 112 77 0.77 1.03 1.54 2 1.53 2 9 100/102* 32 8.6
    SPS 230-160/A 233 160 122 85 0.86 1.15 1.72 2.72 2.05 3 9 70 32 8
    SPS 230-160/B 233 160 122 85 0.86 1.15 1.72 2.72 2.05 2 10.5 120 32 8
    SPS 240-160/A 247 165 130 92 1.35 2 3.03 2.37 3 10.5 70/77* 35 7.4
    SPS 240-160/B 247 165 130 92 1.35 2 3.03 2.37 2 10.5 140 35 7.4
    SPS 240-160/C 247 165 130 92 1.35 2 3.03 2.37 2 10.5 120 35 7.4
    SPS 260-165 262 165 130 92 1.38 2.1 3.28 2.55 3 10.5 77/80* 35 7.4
    SPS 280-165 289 167 132 93 1.55 2.32 3.78 2.8 3 10.5 80 38 7.4
    SPS 300-165/A 308 165 135 94 1.65 2.08 2.5 3.88 2.9 3 9 100/104* 36 7.2
    SPS 300-165/B 308 165 135 94 1.65 2.08 2.5 3.88 2.9 3 11 100 36 7.2
    SPS 330-165 340 165 135 97 1.9 2.37 2.85 4.4 3.5 3 11 110/120* 38 7.2
    SPS 350-165/A 360 165 135 94 2.12 3.2 4.5 3.65 4 9 90 38 7.2
    SPS 350-165/B 360 165 135 94 2.12 3.2 4.5 3.65 3 11 120 38 7.2
    new SPS 230-170 235 170 132 93 1.4 3.09 2.4 2 11 120 35 7
    SPS 200-180 204 182 140 98 1.28 2.84 2.17 2 11 110 44 7
    SPS 260-180 270 188 140 96 1.58 4.1 4.1 3.2 3 11 80 45 7
    SPS 280-180 290 185 140 97 1.7 2.55 4.4 3.3 3 11 80 38 7
    SPS 300-180/A 308 182 140 95 1.8 2.7 4.5 3.5 3 9 100/104* 36 7
    SPS 300-180/B 308 182 140 95 1.8 2.7 4.5 3.5 3 11 100 36 7
    SPS 330-180 340 182 140 98 2 5.2 4 3 11 110/120* 38 7
    SPS 350-180/A 362 182 140 98 2.1 3.15 5.4 4.2 4 9 90 38 7
    SPS 350-180/B 362 182 140 98 2.1 3.15 5.4 4.2 3 11 120 38 7
    SPS 370-180 385 195 140 95 2.24 2.8 6.4 4.9 4 11 90 38 7
    SPS 250-215 257 215 162 113 1.86 5.3 4.1 3 11 85 49 5.88
    SPS 280-215 294 215 163 114 2.18 2.86 3.08 6.04 4.7 3 11 80 50 5.88
    SPS 300-215 310 220 163 112 2.32 2.9 3.48 6.7 5.2 3 11 100 50 5.88
    SPS 330-215 340 215 163 112 2.97 3.56 7.2 5.65 3 11 120 50 5.88
    SPS 350-215 362 215 163 112 3.23 3.87 7.6 5.86 3 11 120 50 5.88
    SPS 370-215 381 215 163 112 3.32 4 8.1 6.3 4 11 90 50 5.88
    SPS 440-215 450 225 165 113 3.92 4.68 9.83 7.44 4 11 110 50 5.88
    SPS 450-215 464 215 163 113 4 4.8 9.95 7.9 5 11 88/90* 50 5.88
    SPS 470-215 480 225 165 113 4.14 4.95 10.56 8.06 4 11 120 50 5.88
    SPS 500-215 515 215 163 113 4.28 5.14 11.25 8.8 5 11 100 50 5.88
    new SPS 630-215 630 220 164 113 7.4 14.29 10.92 7 11 90 50 5.88

    T = Thickness in mm

    Trous spéciaux / épaisseurs différentes / plats de renfort - nous consulter
    * Trous oblongs pour des entraxes différents

    Pour l’épaisseur des Inox, nous consulter.

    Literature Downloads
    White Papers
    Etude de cas: Elévateur de fraisats d'enrobés recyclés (godets SPS)
    Achieving maximum capacity for a new or existing elevator

    FAQ - Elevator Buckets

    FAQ - Elevator Buckets

    What is a HIGH EFFICIENCY elevator bucket?  
    HIGH EFFICIENCY elevator buckets incorporate all five of the following characteristics: a smooth interior front face with no "breaks", wing-less side walls, close vertical placement on the elevator belt, a tapered bottom and the ability to nest for shipping and storage.  For more details, CLICK HERE  
         
    Why use Low Profile elevator buckets?  
    Low profile elevator buckets are created to achieve the closest vertical spacing possible on the elevator belt, thereby optimizing the system for the greatest potential capacity.  Some styles of elevator bucket require modification and others are low profile by standard design.  Wet or sluggish inputs do not generally load and discharge well in low profile buckets.  Due to the extra capacity that is generated and the weight of the additional buckets and material, belt PIW rating, pulley shaft diameters and motor HP may have to be upgraded.  Check with 4B engineering department about the best way to get the most capacity out of your elevator leg.  
         
    Why add vent holes to the bottom of an elevator bucket?  
    When elevating fluffy or powdery materials, vent holes in the bottom of the elevator bucket allow it to fill and discharge more efficiently.  As material enters the bucket, it encounters a pillow of air resting in the bottom.  Vent holes provide an escape path for this pillow of air, so that the entering material does not bounce out of the bucket and back down the elevator leg casing.  Upon discharge, the vent holes allow air to re-enter the bucket at the material exits, releasing any vacuum that might hold it the bucket too long, creating down legging.  
         
    Are CC style elevator buckets interchangeable with Starco elevator buckets?  
    Starco elevator buckets have a special shallow geometry and are intended to be placed extremely close together on the elevator belt.  Therefore, you should check with the 4B engineering department before replacing Starco elevator buckets with any other brand or design.  
         
    How long of an elevator bolt do I need?  
    When installing buckets on an elevator belt, use this simple formula: 
    (belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
         
     

    What is a "digger" bucket?  
    Some materials can form a hardened crust along the side wall of the elevator boot, and powders sitting over time can become rock hard.  Both of these issues can cause premature elevator bucket wear.  Digger buckets are designed to have slightly more width and projection than standard buckets, thereby "digging" through or breaking apart the hardened material, helping to prevent added wear to the standard buckets.  Digger buckets are traditionally made from steel, however nylon buckets may also be used depending on the application.  
         
    How many digger buckets do I need?  
    For most applications, use one digger bucket for every nine standard buckets.  
         
    Can I use buckets on an overlap splice?  
    An overlap splice doubles the thickness of the belt, so a bucket's projection will increase on the overlap.  Usually this will not cause a problem, but if it does, you can use buckets with one inch less projection or cut the tip of each bucket by half an inch on the spliced area.  
         
    When using an overlap splice, how much extra belt should I use for the splice?  
    The length of the splice should be three times the width of the belt.  
         
    How often should I replace head pulley lagging?  
    Lagging should be replaced every time the elevator belt is replaced.

    Service Design pour Elévateurs à Godets

    Service Design pour Elévateurs à Godets

    A 4B, nous avons conçu des centaines d'élévateurs a godets, pour toutes les applications, y inclus l'alimentation animale, céréales, ciment, sable, charbon et autres.

    Profitez de notre service de design gratuit. Qu'il s'agit d'un élévateur nouveau ou existant, notre equipe d'ingénieurs peut vous donner une recommandation technique détaillée, avec une capacité et des caractéristiques de décharges optimales.

    Pour recevoir une calculation gratuite

    remplissez le formulaire ci-dessous. -Tous les champs doivent être renseignées. .

    A 4B, nous avons conçu des centaines d'élévateurs a godets, pour toutes les applications, y inclus l'alimentation animale, céréales, ciment, sable, charbon et autres.

    Profitez de notre service de design gratuit. Qu'il s'agit d'un élévateur nouveau ou existant, notre equipe d'ingénieurs peut vous donner une recommandation technique détaillée, avec une capacité et des caractéristiques de décharges optimales.

    Pour recevoir une calculation gratuite

    remplissez le formulaire ci-dessous. -Tous les champs doivent être renseignées. .

    Contact

    Votre Elévateur

    If you would like to send us a technical drawing or document with your enquiry, please send to 4b-france@go4b.com.

    CAPTCHA
    Cette question sert à vérifier si vous êtes un visiteur humain ou non afin d'éviter les soumissions de pourriel (spam) automatisées.