Godet Type B
Godets d'élévateur de profondeur moyenne

Les godets d'élévateurs de type B sont ideaux pour produits colmatants à vitesse lente et pour produits coulants à vitesse plus rapide et avec un espacement plus petit.

B-type elevator bucket
Product Features
  • Fabrication Emboutie
  • Plus de 60 modèles disponibles
  • Pour produits colmatants à vitesse lente
  • Pour produits coulants à vitesse plus rapide et avec un espacement plus petit
Material
HDP,
Inox,
Acier
Use by Industry
Agriculture,
Industrie
Use by Product
Céréales,
Pellets & Produits légers,
Produits collants,
Industrie légère,
Industrie lourde
    Godet d'élévateur type B - drawing
    A B C D T Weight Capacity (L) Capacity (L) Holes E F G
    B-Type Bucket (mm) (mm) (mm) (mm) (mm) (kg) Z2 (Gross) Z3 (Water) No. (dia mm) (mm) (mm)
    B10 64 51 57 32 1.2 0.08 0.1 0.06 to customer spec
    B17 76 70 67 35 0.9 0.1 0.18 0.1 to customer spec
    B21 95 70 67 35 1.2 0.14 0.22 0.13 to customer spec
    B38 102 86 83 35 1.2 0.18 0.38 0.2 to customer spec
    B44 127 86 83 35 1.2 0.23 0.46 0.23 to customer spec
    B63 127 89 89 38 1.2 0.27 0.55 0.3 to customer spec
    B66 140 89 89 38 1.2 0.29 0.62 0.32 to customer spec
    B70 152 89 89 38 1.2 0.32 0.64 0.34 to customer spec
    B114 P+R 152 95 98 38 1.5 0.41 0.75 0.42 2 8.7 83 25
    B114 152 95 98 38 1.5 0.41 0.75 0.42 to customer spec
    B117 152 95 98 38 3 0.79 0.75 0.42 to customer spec
    B134 HDP 220 106 104 50 4 0.18 1.15 0.62 2 8.7 127 36
    B134 P+R 216 95 98 38 1.5 0.57 1.15 0.57 2 8.7 127 25
    B135 229 95 98 38 1.5 0.59 1.25 0.6 to customer spec
    B135 P+R 229 95 98 38 1.5 0.59 1.25 0.6 2 8.7 127 25
    B147 152 117 108 54 1.5 0.52 1.1 0.59 to customer spec
    B149 152 117 108 54 3 0.98 1.1 0.59 to customer spec
    B151 178 117 108 54 1.5 0.54 1.15 0.65 to customer spec
    B153 178 117 108 54 3 1.02 1.15 0.65 to customer spec
    B155 203 117 108 54 1.5 0.64 1.4 0.83 to customer spec
    B157 203 117 108 54 3 1.2 1.4 0.83 to customer spec
    B167 127 121 114 54 1.5 0.43 0.95 0.5 to customer spec
    B167 P+R 127 121 114 54 1.5 0.43 0.95 0.5 2 8.7 70 32
    B175 152 121 114 54 1.5 0.54 1.1 0.64 to customer spec
    B188 191 121 114 54 2 0.77 1.4 0.83 to customer spec
    B198 229 121 114 54 1.2 0.57 1.75 1 to customer spec
    B200 229 121 114 54 2 0.88 1.75 1 to customer spec
    B201 229 121 114 54 3 1.29 1.75 1 to customer spec
    B205 254 120 114 55 1.5 0.82 1.9 1.1 to customer spec
    B211 178 130 114 54 1.5 0.59 1.45 0.8 to customer spec
    B219 203 130 114 54 1.5 0.64 1.65 0.92 to customer spec
    B221 203 130 114 54 3 1.29 1.65 0.92 to customer spec
    B234 241 130 114 54 3 1.56 2 1.15 to customer spec
    B237 254 130 114 54 2 1.09 2.1 1.25 to customer spec
    B238 254 130 114 54 3 1.54 2.1 1.25 to customer spec
    B242 279 130 114 54 3 1.72 2.35 1.35 to customer spec
    B258 203 133 127 54 1.5 0.79 1.85 0.9 to customer spec
    B263 229 133 127 54 1.5 0.86 2 1 to customer spec
    B266 229 133 127 54 3 1.56 2 1 to customer spec
    B269 254 133 127 54 2 1.13 2.25 1.15 to customer spec
    B278 305 133 127 54 1.5 1 2.8 1.35 to customer spec
    B281 305 133 127 54 3 2 2.8 1.35 to customer spec
    B283* 333 140 140 60 1.5 1.18 3.75 2 to customer spec
    B297 203 152 149 57 3 1.63 2.25 1 to customer spec
    B301 254 152 149 57 3 2 2.75 1.4 to customer spec
    B303 305 152 149 57 1.5 1.18 3.5 1.75 to customer spec
    B304 HDP 298 145 149 48 6.5 0.47 3 1.18 to customer spec
    B304 P+R 305 152 149 57 2 1.56 3.5 1.75 4 8.7 51-102-51 44
    B305 305 152 149 57 3 2.31 3.5 1.75 to customer spec
    B307 381 152 152 67 2 1.93 4.85 2.5 to customer spec
    B307 P+R 381 152 152 67 2 1.93 4.85 2.5 4 8.7 76-127-76
    B364 254 152 178 83 2 1.54 3.6 2 to customer spec
    B365 254 152 178 83 3 2.27 3.6 2 to customer spec
    B323 305 178 181 79 3 2.83 5.5 2.75 to customer spec
    B328 356 178 181 79 3 3.52 6.52 3.25 to customer spec
    B335 305 178 206 79 3 3.02 5.75 2.5 to customer spec
    B339 381 210 184 86 3 4.08 8 4.25 to customer spec
    B340 457 235 210 102 3 5.08 13 7 to customer spec
    B341 457 235 210 102 4.7 6.26 13 7 to customer spec

    * Non stock item. Only made to order.
    HDP - High Density polyethylene with standard recessed holes.
    P + R - With standard recessed holes.

    FAQ - Elevator Buckets

    FAQ - Elevator Buckets

    What is a HIGH EFFICIENCY elevator bucket?  
    HIGH EFFICIENCY elevator buckets incorporate all five of the following characteristics: a smooth interior front face with no "breaks", wing-less side walls, close vertical placement on the elevator belt, a tapered bottom and the ability to nest for shipping and storage.  For more details, CLICK HERE  
         
    Why use Low Profile elevator buckets?  
    Low profile elevator buckets are created to achieve the closest vertical spacing possible on the elevator belt, thereby optimizing the system for the greatest potential capacity.  Some styles of elevator bucket require modification and others are low profile by standard design.  Wet or sluggish inputs do not generally load and discharge well in low profile buckets.  Due to the extra capacity that is generated and the weight of the additional buckets and material, belt PIW rating, pulley shaft diameters and motor HP may have to be upgraded.  Check with 4B engineering department about the best way to get the most capacity out of your elevator leg.  
         
    Why add vent holes to the bottom of an elevator bucket?  
    When elevating fluffy or powdery materials, vent holes in the bottom of the elevator bucket allow it to fill and discharge more efficiently.  As material enters the bucket, it encounters a pillow of air resting in the bottom.  Vent holes provide an escape path for this pillow of air, so that the entering material does not bounce out of the bucket and back down the elevator leg casing.  Upon discharge, the vent holes allow air to re-enter the bucket at the material exits, releasing any vacuum that might hold it the bucket too long, creating down legging.  
         
    Are CC style elevator buckets interchangeable with Starco elevator buckets?  
    Starco elevator buckets have a special shallow geometry and are intended to be placed extremely close together on the elevator belt.  Therefore, you should check with the 4B engineering department before replacing Starco elevator buckets with any other brand or design.  
         
    How long of an elevator bolt do I need?  
    When installing buckets on an elevator belt, use this simple formula: 
    (belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
         
     

    What is a "digger" bucket?  
    Some materials can form a hardened crust along the side wall of the elevator boot, and powders sitting over time can become rock hard.  Both of these issues can cause premature elevator bucket wear.  Digger buckets are designed to have slightly more width and projection than standard buckets, thereby "digging" through or breaking apart the hardened material, helping to prevent added wear to the standard buckets.  Digger buckets are traditionally made from steel, however nylon buckets may also be used depending on the application.  
         
    How many digger buckets do I need?  
    For most applications, use one digger bucket for every nine standard buckets.  
         
    Can I use buckets on an overlap splice?  
    An overlap splice doubles the thickness of the belt, so a bucket's projection will increase on the overlap.  Usually this will not cause a problem, but if it does, you can use buckets with one inch less projection or cut the tip of each bucket by half an inch on the spliced area.  
         
    When using an overlap splice, how much extra belt should I use for the splice?  
    The length of the splice should be three times the width of the belt.  
         
    How often should I replace head pulley lagging?  
    Lagging should be replaced every time the elevator belt is replaced.

    Service Design pour Elévateurs à Godets

    Service Design pour Elévateurs à Godets

    A 4B, nous avons conçu des centaines d'élévateurs a godets, pour toutes les applications, y inclus l'alimentation animale, céréales, ciment, sable, charbon et autres.

    Profitez de notre service de design gratuit. Qu'il s'agit d'un élévateur nouveau ou existant, notre equipe d'ingénieurs peut vous donner une recommandation technique détaillée, avec une capacité et des caractéristiques de décharges optimales.

    Pour recevoir une calculation gratuite

    remplissez le formulaire ci-dessous. -Tous les champs doivent être renseignées. .

    A 4B, nous avons conçu des centaines d'élévateurs a godets, pour toutes les applications, y inclus l'alimentation animale, céréales, ciment, sable, charbon et autres.

    Profitez de notre service de design gratuit. Qu'il s'agit d'un élévateur nouveau ou existant, notre equipe d'ingénieurs peut vous donner une recommandation technique détaillée, avec une capacité et des caractéristiques de décharges optimales.

    Pour recevoir une calculation gratuite

    remplissez le formulaire ci-dessous. -Tous les champs doivent être renseignées. .

    Contact

    Votre Elévateur

    If you would like to send us a technical drawing or document with your enquiry, please send to 4b-france@go4b.com.

    CAPTCHA
    Cette question sert à vérifier si vous êtes un visiteur humain ou non afin d'éviter les soumissions de pourriel (spam) automatisées.