T150 - High heat elevator belt
Heat Resistant Elevator Belt

Suitable for applications in elevators handling products of up to 150˚C and short peaks of 180˚C. Used in the cement, coal, dry chemicals, fly ash industries. Use special 3+3 covers to prevent heat reaching the carcass. For further advice contact technical department.

T150 elevator belt
Product Features
  • Hot industrial products
  • Used in cement, coal, dry chemicals, fly ash industries
  • Special 3+3 covers
  • Temperature resistant up to 150C
  • EP800/4
Temperature
-20˚C to +150˚C
Belt type Belt Thickness Approximate Weight Minimum Pulley Dia
T150 (mm) (kg/sqm) (mm)
EPDM800/4 3+3 NBR T150 11.3 12 500

Technical Specifications

  • Product Norm: DIN 22102 ETY
  • E = anti-static DIN 22104
  • T = heat resistant up to 150°C, EPDM covers and plies resistant to mineral oils at low temperatures, resistant to acids and lyes in low concentrations
  • Y = good abrasion resistance according to DIN 53516
  • Elongation at maximum recommended working load 2.5% at high temps

Gripwell Elevator Belt Splices

Gripwell Elevatorgurtverbinder
Gripwell Elevator Belt Splices

The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.

INFOS PRODUIT

Supergrip Elevator Belt Splices

Supergrip elevator belt fastener
Supergrip Elevator Belt Splices

The Supergrip heavy duty belt fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded steel plates, clamped together by zinc plated high tensile bolts and self-locking nuts.

INFOS PRODUIT

4B Vise Splice

4B Vise Splice
4B Vise Splice

4B Vise Splices are mechanical splices and fasteners for use on most PVC and rubber elevator belts.

Each splice unit is made of three pieces. The outside plates have two different gripping areas. The ribbed gripping area is mounted towards the face of the belt. The opposite end has a series of both longitudinal and axial "teeth." The center plate is symmetrical and cannot be improperly installed around its elongated center hole.

The splice works by using the tension supplied by the belting. This tension on the belt ends pulls the outer plates apart, and forces gripping pressure towards the teeth on the splice unit. The greater the belt tension, the more pressure is exerted on the gripping teeth at the forward end of the splice.

INFOS PRODUIT

Bucket Elevator Design Service

Bucket Elevator Design Service

At 4B, we have designed hundreds of bucket elevators for all industries, including Animal Feed, Grain Handling, Flour Milling, Malting & Brewing through to Cement, Coal and other heavy industries.

Take advantage of 4B's free, guaranteed worldwide technical support service from a team of engineers specialising in the design and calculation of bucket elevators.. Using your key technical data, our engineers can give you a detailed technical recommendation for the ideal bucket elevator with the ideal capacity and discharge characteristics. We can either design your new bucket elevator or we can help you to increase the capacity of your existing bucket elevator.

To get a free bucket elevator calculation

Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively. 

At 4B, we have designed hundreds of bucket elevators for all industries, including Animal Feed, Grain Handling, Flour Milling, Malting & Brewing through to Cement, Coal and other heavy industries.

Take advantage of 4B's free, guaranteed worldwide technical support service from a team of engineers specialising in the design and calculation of bucket elevators.. Using your key technical data, our engineers can give you a detailed technical recommendation for the ideal bucket elevator with the ideal capacity and discharge characteristics. We can either design your new bucket elevator or we can help you to increase the capacity of your existing bucket elevator.

To get a free bucket elevator calculation

Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively. 

Contact

Votre Elévateur

If you would like to send us a technical drawing or document with your enquiry, please send to 4b-france@go4b.com.