4B Speed Relay (USR)
Universal speed relay for all speed monitoring applications
USR1V4, USR1V46

The Speed Relay is a microprocessor controlled digital speed monitor for use with 2, 3, 4 wire NPN/PNP sensors, 4B’s WDA range of sensors or Contact sensor inputs, with a user programmable electromechanical relay and PhotoMOS Solid State Relay (SSR) outputs. The Speed Relay has a 160x80 pixel LCD display to provide information, and 3 front panel buttons to program settings.

4B speed relay
Product Features
  • Universal speed relay for all speed monitoring applications
  • Intuitive user configuration using control buttons and LCD display
  • Relay and solid state outputs with individual speed range monitoring
  • Supports complete 4B sensor range
  • Live, scalable, linear, and rotary speed display: mtrs/s, RPM. PPM
Certification

UKEx

UKEx
Kuva

CE

CE
Kuva
CE Logo
    Literature Downloads
    Technical Manuals & Docs

    Encoder-Flex 1024

    Encoder-Flex 1024
    Encoder-Flex 1024

    The Encoder-Flex 1024 is a rotary shaft encoder that monitors slide gate position, shaft position, or shaft speed. Examples include position of rack and pinion gates, valves, distributors, and shaft speed on rotating shafts such as slow moving conveyors, mixers, and dryers.

    The Encoder-Flex 1024 uses innovative technology to monitor gate position or shaft speed. The resolution is programmable from 1-1024 pulses per revolution and it consists of 4-20 mA output as well as quadrature pulsed output for directional speed, and a Modbus RTU communications for advanced configuration and diagnostics.

    There are two status LEDs for easy identification of operational mode and target detection. The unit is quickly calibrated with the touch of a magnet for shaft speed, angular shaft position, or gate position. The sealed body is constructed from stainless steel.

    PRODUCT DETAILS

    WDA3 Motion Alignment Sensor

    4B WDA motion alignment sensor
    WDA3 Motion Alignment Sensor

    Non-contacting extended range magnetic proximity sensor, not affected by dust or material build up, used to detect moving ferrous material up to 100mm away from the sensor. The WDA sensor can be used on bucket elevators to measure speed and alignment by sensing either the metal elevator buckets, or the ferrous bolts attached to plastic buckets. A more specialized use for the WDA switch is as a broken/slack chain detector on drag chain conveyors, or as a non-contact speed switch for screw conveyors. The sensor is used in conjunction with a PLC or with 4B's Watchdog™ Elite or A400 Elite control units. Two output signals are provided: one signal is a pulse output, representing each bucket detected: the second signal is a continuous output when moving buckets are detected.

    PRODUCT DETAILS

    P800 Proxswitch

    P800 inductive proximity sensor DIN style
    P800 Proxswitch

    The P800 Proxswitch is an inductive sensor designed to detect shaft speed, shaft position, gate position, or object presence.

    PRODUCT DETAILS

    M1003 Stopswitch

    M100 Stopswitch
    M1003 Stopswitch

    The M1003 Stopswitch is a simple inductive shaft speed monitoring device. The self-contained unit, which signals when the shaft has stopped rotating. It can be used for process control, motion detection and stopped shaft indication. An inductive sensing device located in the nose of the M100 enclosure will detect a metal target. This target can be an existing bolt head or device attached to a shaft. The M1003 Stopswitch requires no calibration and provides an output when the shaft has stopped rotating.

    PRODUCT DETAILS

    M3003, M3008 & M3007 Slipswitch

    M3003 & M3007 Slipswitch
    M3003, M3008 & M3007 Slipswitch

    The M300 Slipswitch is an easy-to-use inductive proximity shaft speed monitoring device with an adjustable 0 - 30 second start-up delay, all housed in a 30 mm diameter moulded body. The self-contained unit has a single set point, which signals when the shaft speed has dropped by 20% of normal running speed. It is used for detecting dangerous slow down and underspeed conditions on conveyors, bucket elevators, air locks, mixers, fans, grinders and many other machines. 

    No connection is necessary between the sensor and the equipment being monitored. The proximity sensor detects a stud or bolt mounted on a shaft, or other suitable target. Ideally, the target should be of ferrous metal, but non-ferrous metal will be detected at a shorter range. Maximum range of ferrous targets is 8 mm (5/16”) and for non-ferrous targets is 5 mm (6/16”), assuming a 20 mm (3/4”) diameter target. Smaller targets may be used but operating distances will be reduced.

    PRODUCT DETAILS

    M800 Speed Switch

    M800 Elite speed switch
    M800 Speed Switch

    The M800 Elite Speed Switch is designed to detect belt slip, belt underspeed, stop motion, low speed or zero speed on bucket elevators, conveyors, airlocks, mixers, fans, grinders and many other rotating machines. Totally sealed and simple to calibrate, the M800 Elite works in the harshest of conditions.

    An inductive sensing device located in the nose of the M800 Elite enclosure will detect a metal target. This target can be an existing bolt head or device attached to a shaft. During installation the M800 Elite is set to the normal machine shaft RPM by calibrating with the magnet provided. The internal microprocessor sets the alarm and shutdown relays.

    PRODUCT DETAILS