Godet GB - Spidex™ - sans fond
Godets d'élévateur sans fond

Elévateur à godets sans fond. Les godets GB/Spidex sont montés serrés avec une série de godets sans fond et un avec fond tous les mètres. La matière est transportée sous forme de colonne continue, éliminant ainsi l’espace perdu entre chacun des godets et offrant ainsi un meilleur rendement. Le chargement et le déchargement s’effectue normalement, mais le plus grand soin doit être apporté dans la conception de la tête et du pied de l’élévateur.

GB Spidex elevator bucket
Product Features
  • Godet idéal pour augmenter la capacité d'élévateurs éxistants ou neufs
  • Godets montés avec très peu d'espacement formant une colonne continue
  • Une série de godets sans fond suivie d'un godet avec fond
  • Utilisés sur la plupart des produits: du grain au ciment et des poudres aux phosphates
Material
Inox,
Acier
Use by Industry
Agriculture,
Industrie
Use by Product
Céréales,
Pellets & Produits légers,
Produits collants,
Ciment
    Godet GB - Spidex™ - drawing
    GB bucket A B C T Weight Capacity (L) Holes E F G Bucket Spacing Max.
    STANDARD (mm) (mm) (mm) (mm) (kg) Z2 (total) No. (dia mm) (mm) (mm) (mm) Pcs/Mtr
    GB130-110-B 136 114 51 1.5 0.3 0.5 2 8.5 70 22 57 17.5
    GB130-110+B 136 114 51 1.5 0.36 0.5 2 8.5 70 22 57 17.5
    GB180-140-B 185 139 65 1.5 0.45 1.18 2 9 100 32 71 14
    GB180-140+B 185 139 65 1.5 0.55 1.18 2 9 100 32 71 14
    GB230-165-B 237 163 71 2 0.83 2.1 2 10 120 32 80 12.5
    GB230-165+B 237 163 71 2 1.12 2.1 2 10 120 32 80 12.5
    GB300-165-B 305 166 80 2 1.1 2.75 3 10.5 90* 36 88 11.4
    GB300-165+B 305 166 80 2 1.4 2.75 3 10.5 90* 36 88 11.4
    GB350-200-B 355 200 100 2.5 1.95 4.75 4 11 90 42 111 9
    GB350-200+B 355 200 100 2.5 2.5 4.75 4 11 90 42 111 9
    GB400-220-B 410 218 115 3 2.3 6.91 4 11 100 45 125 8
    GB400-220+B 410 218 115 3 2.95 6.91 4 11 100 45 125 8
    GB bucket A B C T Weight Capacity (L) Holes E F G Bucket Spacing Max.
    SPECIAL RANGE (mm) (mm) (mm) (mm) (kg) Z2 (total) No. (dia mm) (mm) (mm) (mm) Pcs/Mtr
    GB215-95-B 220 93 63 1.5 0.4 0.95 2 8.5 127 25 67 14.9
    GB215-95+B 220 93 63 1.5 0.5 0.95 2 8.5 127 25 67 14.9
    GB380-165-B 380 165 80 2.5 1.7 3.5 4 9 *** 36 88 11.4
    GB380-165+B 380 165 80 2.5 2.15 3.5 4 9 *** 36 88 11.4
    GB325-190-B 335 191 88 2.5 1.65 3.6 3 9 100 25 100 10.5
    GB325-190+B 335 191 88 2.5 2.11 3.6 3 9 100 25 100 10.5
    GB400-200-B 410 200 97 2 1.66 5.4 4 9 94 32 105 9.5
    GB400-200+B 410 200 97 2 2.2 5.4 4 9 94 32 105 9.5
    GB430-200-B 437 200 95 2 1.77 5.56 4 9 94 32 105 9.5
    GB430-200+B 437 200 95 2 2.3 5.56 4 9 94 32 105 9.5
    SPIDEX bucket A B C T Weight Capacity (L) Holes E F G Bucket Spacing Max.
    (mm) (mm) (mm) (mm) (kg) Z2 (total) No. (dia mm) (mm) (mm) (mm) Pcs/Mtr
    Spidex 100-90-B 106 88 45 0.9 0.1 0.23 2 8.5 50 17 50 20.0
    Spidex 100-90+B 106 88 45 0.9 0.12 0.23 2 8.5 50 17 50 20.0
    Spidex 130-110-B 136 114 51 1.5 0.26 0.5 2 8.5 70 22 57 17.5
    Spidex 130-110+B 136 114 51 1.5 0.31 0.5 2 8.5 70 22 57 17.5
    Spidex 180-140-B 185 139 65 1.5 0.41 1.08 2 9.0 100 32 71 14.0
    Spidex 180-140+B 185 139 65 1.5 0.5 1.08 2 9.0 100 32 71 14.0
    Spidex 280-165-B 291 165 80 2 0.99 2.67 3 11.0 90 36 87 11.5
    Spidex 280-165+B 291 165 80 2 1.32 2.67 3 11.0 90 36 87 11.5
    Spidex 330-190-B 341 192 99 3 2.07 4.5 3 12.0 100 49 105 9.5
    Spidex 330-190-B 341 192 99 3 2.82 4.5 3 12.0 100 49 105 9.5

    Trous bombés comme standard.

    ** Espacement préconisé pour le transport du grain ou de produits granuleux

    * Trous de fixation GB 380-165. Entraxes 76-127-76

    Spidex 100-90, Spidex 130-110 et Spidex 180-140: trous plats.
    Spidex 100-90, Spidex 130-110 et Spidex 180-140, Spidex 230-165: Encoche au dos

    GB Elevator Buckets - Spacing ProfileWith the GB system, buckets are centered at very close spacing with a series of buckets without bottoms followed by a closed bottom bucket. The material is lifted in a continuous column, so the carrying space between conventional buckets is fully utilized by material to achieve much greater capacity. The buckets "fan out" as they pass over the head and tail pulleys to facilitate pick up or discharge.    
           
    The system increases capacity of an existing elevator leg at a much lower cost than the purchase of a new bucket elevator. The GB system can also be used in new elevators to give the same capacity as larger elevators using traditional buckets, saving manufacturing costs and plant space.    
           
    GB Spidex™ buckets are particularly useful with sticky products which can clog up the bottoms of  conventional buckets reducing capacity and increasing maintenance.  With GB buckets, only the bucket with the bottom can become clogged, and capacity can be rated to allow for this. The remaining buckets, being bottomless, are self cleaning.  Aeriable products are also handled easily as GB buckets have the ultimate vented design.    
           
    Whether your leg is handling grain, feed, meals, fertilizer, or industrial materials such as free flowing cement, 4B can design a GB Spidex™ bucket system to deliver the capacity you require.    
             
    Sample Capacity Between GB Spidex™ and CC Style Buckets:  
        • GB 12 x 6:  3-7/16" Spacing, 630 ft/min Belt at Actual Working Capacity = 12,600 CFH  
        • CC-HD 12 x 6:  8" Spacing, 630 ft/min Belt at Water Level +10% = 6,694 CFH

    FAQ - Elevator Buckets

    FAQ - Elevator Buckets

    What is a HIGH EFFICIENCY elevator bucket?  
    HIGH EFFICIENCY elevator buckets incorporate all five of the following characteristics: a smooth interior front face with no "breaks", wing-less side walls, close vertical placement on the elevator belt, a tapered bottom and the ability to nest for shipping and storage.  For more details, CLICK HERE  
         
    Why use Low Profile elevator buckets?  
    Low profile elevator buckets are created to achieve the closest vertical spacing possible on the elevator belt, thereby optimizing the system for the greatest potential capacity.  Some styles of elevator bucket require modification and others are low profile by standard design.  Wet or sluggish inputs do not generally load and discharge well in low profile buckets.  Due to the extra capacity that is generated and the weight of the additional buckets and material, belt PIW rating, pulley shaft diameters and motor HP may have to be upgraded.  Check with 4B engineering department about the best way to get the most capacity out of your elevator leg.  
         
    Why add vent holes to the bottom of an elevator bucket?  
    When elevating fluffy or powdery materials, vent holes in the bottom of the elevator bucket allow it to fill and discharge more efficiently.  As material enters the bucket, it encounters a pillow of air resting in the bottom.  Vent holes provide an escape path for this pillow of air, so that the entering material does not bounce out of the bucket and back down the elevator leg casing.  Upon discharge, the vent holes allow air to re-enter the bucket at the material exits, releasing any vacuum that might hold it the bucket too long, creating down legging.  
         
    Are CC style elevator buckets interchangeable with Starco elevator buckets?  
    Starco elevator buckets have a special shallow geometry and are intended to be placed extremely close together on the elevator belt.  Therefore, you should check with the 4B engineering department before replacing Starco elevator buckets with any other brand or design.  
         
    How long of an elevator bolt do I need?  
    When installing buckets on an elevator belt, use this simple formula: 
    (belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
         
     

    What is a "digger" bucket?  
    Some materials can form a hardened crust along the side wall of the elevator boot, and powders sitting over time can become rock hard.  Both of these issues can cause premature elevator bucket wear.  Digger buckets are designed to have slightly more width and projection than standard buckets, thereby "digging" through or breaking apart the hardened material, helping to prevent added wear to the standard buckets.  Digger buckets are traditionally made from steel, however nylon buckets may also be used depending on the application.  
         
    How many digger buckets do I need?  
    For most applications, use one digger bucket for every nine standard buckets.  
         
    Can I use buckets on an overlap splice?  
    An overlap splice doubles the thickness of the belt, so a bucket's projection will increase on the overlap.  Usually this will not cause a problem, but if it does, you can use buckets with one inch less projection or cut the tip of each bucket by half an inch on the spliced area.  
         
    When using an overlap splice, how much extra belt should I use for the splice?  
    The length of the splice should be three times the width of the belt.  
         
    How often should I replace head pulley lagging?  
    Lagging should be replaced every time the elevator belt is replaced.

    Service Design pour Elévateurs à Godets

    Service Design pour Elévateurs à Godets

    A 4B, nous avons conçu des centaines d'élévateurs a godets, pour toutes les applications, y inclus l'alimentation animale, céréales, ciment, sable, charbon et autres.

    Profitez de notre service de design gratuit. Qu'il s'agit d'un élévateur nouveau ou existant, notre equipe d'ingénieurs peut vous donner une recommandation technique détaillée, avec une capacité et des caractéristiques de décharges optimales.

    Pour recevoir une calculation gratuite

    remplissez le formulaire ci-dessous. -Tous les champs doivent être renseignées. .

    A 4B, nous avons conçu des centaines d'élévateurs a godets, pour toutes les applications, y inclus l'alimentation animale, céréales, ciment, sable, charbon et autres.

    Profitez de notre service de design gratuit. Qu'il s'agit d'un élévateur nouveau ou existant, notre equipe d'ingénieurs peut vous donner une recommandation technique détaillée, avec une capacité et des caractéristiques de décharges optimales.

    Pour recevoir une calculation gratuite

    remplissez le formulaire ci-dessous. -Tous les champs doivent être renseignées. .

    Contact

    Votre Elévateur

    If you would like to send us a technical drawing or document with your enquiry, please send to 4b-france@go4b.com.

    CAPTCHA
    Cette question sert à vérifier si vous êtes un visiteur humain ou non afin d'éviter les soumissions de pourriel (spam) automatisées.