Godet JUMBO CC-S (JCC-S)
Godets d'élévateurs de style CC-S pour service ultra-intensif
JCC-S 14x8, JCC-S 16x8, JCC-S 18x8, JCC-S 20x8, JCC-S 22x8, JCC-S 24x8

Le JUMBO™ CC-S ® est une version "service ultra-intensif" du godet CC-S, et fait partie de la gamme de godets "Haute Efficacité" de 4B.

Il est destiné pour les applications les plus sévères, telles que les terminaux portuaires, les usines d’éthanol, et les matériaux hautements inflammables.

Il offre la plus grande capacité et détient le rebord, coins et murs les plus épais. L’unique Iceberg Edge possède un rebord qui délivre une résistance aux impactes et une longue durée de vie. Il partage la géométrie et les caractéristiques de conception du CC-S, y compris le bénéfice d’empilage, ce qui permet d’économiser les coûts de fret et d’espace de stockage.

Le JUMBO™ CC-S ® est moulé à partir de PEHD vierge (nylon et uréthane sont aussi disponibles) pour un service intensif extrème et une très longue durée.  

 

 

JCC-S elevator bucket
Product Features
  • Extrèmement solide et flexible
  • Rebord, murs et coins épais pour une longue vie.
  • "Iceberg" ™ bords pour une manipulation douce et une plus longue vie.
  • Conception empilable pour une livraison et un stockage efficaces.
  • Fond conique pour un espace vertical plus fermé.
Material
HDP,
Nylon,
Polyuréthane
Use by Industry
Agriculture,
Industrie
Use by Product
Céréales,
Pellets & Produits légers,
Produits collants,
Ciment,
Industrie légère,
Industrie lourde
    Godet JUMBO CC-S  (JCC-S) - drawing
    JCC-S Bucket A B C D T Weight Capacity (L) Capacity (L) Capacity (L) Holes E F G Max
    (mm) (mm) (mm) (mm) (mm) (kg) Z2 (total) Z3 +10% Z3 (water) No. (dia mm) (mm) (mm) Pcs/Mtr
    JCC-S 14x8 377 234 211 148 13 2.2 9.47 8.14 7.4 5 11 75 60 4.6
    JCC-S 16x8 432 234 211 148 13 2.42 10.92 9.41 8.55 6 11 70 60 4.6
    JCC-S 18x8 483 234 211 148 13 2.7 12.42 10.7 9.73 5 11 95 60 4.6
    JCC-S 20x8 534 234 211 148 13 2.86 13.83 11.94 10.85 6 11 90 60 4.6
    JCC-S 22x8 585 234 211 148 13.5 3.26 15.16 13.08 11.89 6 11 100 60 4.6
    JCC-S 24x8 634 234 211 148 13.5 3.52 16.51 14.26 12.96 7 11 90 60 4.6

    Le JUMBO CC-S est-il interchangeable avec le godet CC-S ?

      Le JUMBO CC-S partage un même motif de trous de boulons que le godet CC-S. Donc, il est directement interchangeable avec le CC-S, ainsi qu'avec la plupart des autres marques de godets d'élévateurs. Dans certains cas, à cause de son extra capacité et le poids des materiaux, l'évaluation PIW de la sangle d'élévateur, les diamètres de l'abre de la poulie et le moteur HP devront être mis à jour. Vérififiez avec le departement d'ingénierie de 4B si vous êtes incertains quant à la capacité de la jambe de votre élévateur existant à accepter le JUMBO CC-S.

     

     

     

    FAQ - Elevator Buckets

    FAQ - Elevator Buckets

    What is a HIGH EFFICIENCY elevator bucket?  
    HIGH EFFICIENCY elevator buckets incorporate all five of the following characteristics: a smooth interior front face with no "breaks", wing-less side walls, close vertical placement on the elevator belt, a tapered bottom and the ability to nest for shipping and storage.  For more details, CLICK HERE  
         
    Why use Low Profile elevator buckets?  
    Low profile elevator buckets are created to achieve the closest vertical spacing possible on the elevator belt, thereby optimizing the system for the greatest potential capacity.  Some styles of elevator bucket require modification and others are low profile by standard design.  Wet or sluggish inputs do not generally load and discharge well in low profile buckets.  Due to the extra capacity that is generated and the weight of the additional buckets and material, belt PIW rating, pulley shaft diameters and motor HP may have to be upgraded.  Check with 4B engineering department about the best way to get the most capacity out of your elevator leg.  
         
    Why add vent holes to the bottom of an elevator bucket?  
    When elevating fluffy or powdery materials, vent holes in the bottom of the elevator bucket allow it to fill and discharge more efficiently.  As material enters the bucket, it encounters a pillow of air resting in the bottom.  Vent holes provide an escape path for this pillow of air, so that the entering material does not bounce out of the bucket and back down the elevator leg casing.  Upon discharge, the vent holes allow air to re-enter the bucket at the material exits, releasing any vacuum that might hold it the bucket too long, creating down legging.  
         
    Are CC style elevator buckets interchangeable with Starco elevator buckets?  
    Starco elevator buckets have a special shallow geometry and are intended to be placed extremely close together on the elevator belt.  Therefore, you should check with the 4B engineering department before replacing Starco elevator buckets with any other brand or design.  
         
    How long of an elevator bolt do I need?  
    When installing buckets on an elevator belt, use this simple formula: 
    (belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
         
     

    What is a "digger" bucket?  
    Some materials can form a hardened crust along the side wall of the elevator boot, and powders sitting over time can become rock hard.  Both of these issues can cause premature elevator bucket wear.  Digger buckets are designed to have slightly more width and projection than standard buckets, thereby "digging" through or breaking apart the hardened material, helping to prevent added wear to the standard buckets.  Digger buckets are traditionally made from steel, however nylon buckets may also be used depending on the application.  
         
    How many digger buckets do I need?  
    For most applications, use one digger bucket for every nine standard buckets.  
         
    Can I use buckets on an overlap splice?  
    An overlap splice doubles the thickness of the belt, so a bucket's projection will increase on the overlap.  Usually this will not cause a problem, but if it does, you can use buckets with one inch less projection or cut the tip of each bucket by half an inch on the spliced area.  
         
    When using an overlap splice, how much extra belt should I use for the splice?  
    The length of the splice should be three times the width of the belt.  
         
    How often should I replace head pulley lagging?  
    Lagging should be replaced every time the elevator belt is replaced.

    Service Design pour Elévateurs à Godets

    Service Design pour Elévateurs à Godets

    A 4B, nous avons conçu des centaines d'élévateurs a godets, pour toutes les applications, y inclus l'alimentation animale, céréales, ciment, sable, charbon et autres.

    Profitez de notre service de design gratuit. Qu'il s'agit d'un élévateur nouveau ou existant, notre equipe d'ingénieurs peut vous donner une recommandation technique détaillée, avec une capacité et des caractéristiques de décharges optimales.

    Pour recevoir une calculation gratuite

    remplissez le formulaire ci-dessous. -Tous les champs doivent être renseignées. .

    A 4B, nous avons conçu des centaines d'élévateurs a godets, pour toutes les applications, y inclus l'alimentation animale, céréales, ciment, sable, charbon et autres.

    Profitez de notre service de design gratuit. Qu'il s'agit d'un élévateur nouveau ou existant, notre equipe d'ingénieurs peut vous donner une recommandation technique détaillée, avec une capacité et des caractéristiques de décharges optimales.

    Pour recevoir une calculation gratuite

    remplissez le formulaire ci-dessous. -Tous les champs doivent être renseignées. .

    Contact

    Votre Elévateur

    If you would like to send us a technical drawing or document with your enquiry, please send to 4b-france@go4b.com.

    CAPTCHA
    Cette question sert à vérifier si vous êtes un visiteur humain ou non afin d'éviter les soumissions de pourriel (spam) automatisées.
    JCC-S Buckets Video