IE-Node
Remote Sensor Monitoring for PLC's & Automation Systems
ETH-NODE1V46CAI, ETH-NODE1V4CAI, ETH-NODE2V46CAI, ETH-NODE2V4CAI

The Industrial Ethernet Node (IE-NODE) is a remote monitoring interface designed to provide sensor data to PLC’s or other automation and control systems.

Both units can be expanded to 16 sensor inputs with the installation of optional expansion boards.

The IE-NODE operates by reading its sensor inputs and sending processed data when requested by another system (e.g. PLC). The units are equipped with an RJ45 Ethernet socket and supports PROFINET, EtherNet/IP and Modbus TCP/IP protocols for easy integration with Siemens, Allen-Bradley Rockwell, Modicon and other PLC’s or automation devices.

The IE-NODE’s network configurator software provides a visual view of all devices on the network. It allows for easy identification of each unit on the network and allows for network settings to be changed as needed.

IE-Node
Product Features
  • Sensor Interface for PLC’s & Automation Systems
  • Supports PROFINET, EtherNet/IP and Modbus TCP/IP protocols
  • Up to 16 total sensor inputs with available expansion boards
  • Configurator software for easy network setup and visual overview of all devices
Certification

ATEX

ATEX
Kuva
ATEX Logo

UKEx

UKEx
Kuva

IECEx

IECEx
Kuva
IECExv3

EACEX

EACEX
Kuva
EACEx

CnEx

CnEx
Kuva
Nepsi

CSA

CSA
Kuva
CSA logo

CE

CE
Kuva
CE Logo
    ie-node-diagram
    Part Number Description Inputs Supply Voltage CSA ATEX IECEx
    ETH-NODE1V46CAI IE-NODE 1 8 Contact or NTC Temperature and 2 Pulse or Analog (4-20 mA) 120 to 240 VAC / 24 VDC Class II Div 2 Zone 22 Zone 22
    ETH-NODE1V4CAI IE-NODE 1 8 Contact or NTC Temperature and 2 Pulse or Analog (4-20 mA) 24 VDC Class II Div 2 Zone 21 Zone 21
    ETH-NODE2V46CAI IE-NODE 2 10 Analog (4-20 mA) 120 to 240 VAC / 24 VDC Class II Div 2 Zone 22 Zone 22
    ETH-NODE2V4CAI IE-NODE 2 10 Analog (4-20 mA) 24 VDC Class II Div 2 Zone 21 Zone 21
    ETH-NODE-AUXI-6NTC NTC Expansion Board x
    ETH-NODE-AUXI-6AN Analog Expansion Board x

    HazardMon.com®

    Hazardmon cloud-based hazard monitoring solution
    HazardMon.com®

    HazardMon.com® is a secure cloud based hazard monitoring solution providing status notifications and data logging for bucket elevators and conveyors. Live system status, graphs and historical data can be viewed on any web-enabled device (smartphone, tablet PC, desktop or laptop computer). Emails can be sent to notify users whenever a change in the system's health is detected. An automated maintenance feature allows site operators to verify that all sensors on the system are operational and working correctly.
    Hazardmon.com works in conjunction with 4B's Watchdog Super Elite™, T500 Elite Hotbus™ & IE-Node control systems for bucket elevators and conveyors. Both multi-function systems are specially designed to monitor equipment for belt misalignment, belt speed, continuous bearing temperature, pulley alignment, level and plug conditions. 

    New version of Hazardmon can be found on: https://new.hazardmon.com/ 

    PRODUCT DETAILS

    IE Switch

    IE-Switch
    IE Switch

    The Industrial Ethernet Switch is an unmanaged switch with 5x RJ45 Ethernet sockets for 10/100 Mbps Ethernet Communications. It is designed to work with 4B’s Industrial Ethernet Nodes (IE-NODEs) or any other devices requiring 10/100 Mbps Ethernet communications.  The switch can be used in dust hazardous areas up to Zone 21 (V4) and Zone 22 (V46).

    PRODUCT DETAILS

    NTC Expansion Board for IE-Node

    NTC Expansion Board for IE-Node
    NTC Expansion Board for IE-Node

    The ETH-NODE-AUXI-6NTC Expansion board allows for the support of up to 6 extra NTC temperature sensors or 6 contact sensors, or any combination of 6. Additionally, it adds the capability to allow for an RS485 Modbus RTU connection to be made to the device to access all onboard sensor information.

    PRODUCT DETAILS

    Analogue Expansion Board for IE-Node

    analogue expansion board for IE-Node
    Analogue Expansion Board for IE-Node

    The ETH-NODE-AUXI-6AN Expansion board allows for the support of up to 6 extra CLI (Current Loop Input) sensors.

    Additionally, it adds the capability to allow for an RS485 Modbus RTU connection to be made to the device to access all onboard sensor information.

    PRODUCT DETAILS

    Ethernet Node Switch Expansion

    ETH-NODE-AUXSW-4P Ethernet Node Switch Expansion
    Ethernet Node Switch Expansion

    The ETH-NODE-AUXSW-4P Expansion board provides an additional 4 Ethernet ports when installed within (IE-NODEs).  This provides more flexible plant cable routing, saving materials and installation time.

    PRODUCT DETAILS

    Milli-Speed Switch

    4B  Milli speed switch (ATEX version)
    Milli-Speed Switch

    The Milli-Speed Sensor has a 4-20 mA output proportional to calibrated speed, it is designed to allow detection of belt slip & underspeed, stop motion, low speed or zero speed on bucket elevators, conveyors, airlocks, mixers, fans, grinders and many other rotating machines.  Totally sealed and simple to calibrate, the Milli-Speed works in the harshest of conditions.

    An inductive sensing device located in the nose of the Milli-Speed enclosure will detect a metal target. This target can be an existing bolt head or device attached to a shaft, such as 4B’s Whirligig® sensor mount. During installation, the Milli-Speed is set to the normal running RPM by simple magnetic calibration.

    PRODUCT DETAILS

    M800 Speed Switch

    M800 Elite speed switch
    M800 Speed Switch

    The M800 Elite Speed Switch is designed to detect belt slip, belt underspeed, stop motion, low speed or zero speed on bucket elevators, conveyors, airlocks, mixers, fans, grinders and many other rotating machines. Totally sealed and simple to calibrate, the M800 Elite works in the harshest of conditions.

    An inductive sensing device located in the nose of the M800 Elite enclosure will detect a metal target. This target can be an existing bolt head or device attached to a shaft. During installation the M800 Elite is set to the normal machine shaft RPM by calibrating with the magnet provided. The internal microprocessor sets the alarm and shutdown relays.

    PRODUCT DETAILS

    P800 Proxswitch

    P800 inductive proximity sensor DIN style
    P800 Proxswitch

    The P800 Proxswitch is an inductive sensor designed to detect shaft speed, shaft position, gate position, or object presence.

    PRODUCT DETAILS

    Touchswitch™

    4b Touchswitch sensor
    Touchswitch™

    The Touchswitch is an electro-mechanical limit switch with no moving parts, which detects tracking and misalignment problems on bucket elevators and conveyors. When a belt misaligns or a pulley moves over and contacts the sensor, the built in solid-state electronic circuitry detects the lateral force of the belt or pulley and activates a voltage free solid state relay output. This output signal is used to immediately alarm and ultimately shutdown the machine.

    The face of the sensor is made from hardened and annealed stainless steel, not soft brass or aluminium, so wear life is longer when a belt contacts it. The Touchswitch is not affected by dust or material build up and will still work when completely covered by material. An external test wheel allows for quick and simple sensor/system testing. The sensors are usually installed in pairs on opposite sides of the machine. The sensors can be connected directly to a PLC input, or for greater safety, to a central independent monitoring system, such as Watchdog Super Elite, IE-Node or the T500 Hotbus system.

    PRODUCT DETAILS

    Binswitch Elite Capacitive Sensor

    4B Binswitch Elite Capacitive Sensor
    Binswitch Elite Capacitive Sensor

    Detects level or plug situations for bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs.

    PRODUCT DETAILS

    ADB Series Bearing Sensors

    ADB bearing temperature sensor
    ADB Series Bearing Sensors

    The ADB series have been designed to allow the depth of the sensor to be adjustable depending on your application. A number of versions are available with probe lengths of 50, 100, 200 and 300 mm. The sensors screw directly into a bearing housing through a 1/4” BSPT threaded grease zerk. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor. The ADB series have NTC or PT100 type thermistors which allow for continuous temperature monitoring.

    The sensor is supplied with a 3m attached cable and can be connected to a PLC or to a hazard monitoring system, such as 4B’s Watchdog Super Elite, T500 Hotbus Elite or T400 NTC Elite. The connections are not polarity sensitive therefore special connection requirements are eliminated, and the cable can be extended in the field.

    PRODUCT DETAILS

    Milli-Temp Series Bearing Temperature Sensor

    4b Milli-Temp bearing temperature sensor
    Milli-Temp Series Bearing Temperature Sensor

    The Milli-Temp series can be used on any application where bearing temperature monitoring is needed.  The Milli Temp is a loop powered analogue sensor with a 4-20 mA linear output that is scaled across a temperature range for continuous temperature monitoring.

    The sensor has been designed to allow the depth of the probe to be adjustable depending on your application. The sensor screws directly into a bearing housing through the existing grease zerk thread. Each sensor is fitted with a zerk to allow lubrication of the bearing without the need for removal of the sensor. For surface mount applications, a lug style adaptor bolts directly onto a bearing housing, motor, gearbox, or machine casing.

    The mounting hole is 9.5mm from the factory, but can be drilled up to 12.5mm if needed.
    The sensor is supplied with a 3m cable. The connections are not polarity sensitive therefore special connection requirements are eliminated, and the cable can be extended in the field.

    PRODUCT DETAILS

    Where can I install the IE-Node?

    Indoors or outdoors, in both general-purpose or dust hazard locations.
    The IE-Node carries national and international approvals and is IP66 rated.

    How many IE-Nodes can I have on my network?

    You can connect 256+ IE-Nodes per network with up to 16 sensor inputs inside each unit.
    That adds up to more than 4,000 sensors on a single network!

    What types of sensor can I connect to my IE-Node?

    The IE-Node offers multiple input configurations for sensors – discrete, analog, temperature, speed and frequency – meeting the needs of your operation today, tomorrow and well into the future.

    Will it work with my PLC of choice?

    Yes. No matter what you work with, the IE-Node will work with you. This device can talk to any EtherNet/IP, PROFINET, or Modbus TCP/IP enabled PLC or automation device. 
    Sample code is also provided for Rockwell/Siemens PLCs.

    What is HazardMon?

    HazardMon is 4B’s cloud platform that lets you check real-time sensor data and compare historical analytics from your phone, computer, laptop or tablet. All that data can be accessed 24/7 from anywhere in the world. 
    You can unlock unlimited access to HazardMon with the IE-Node at https://hazardmon.com.

    Hazard Monitoring Design Service

    Hazard Monitoring Design Service

    Preventative maintenance can help reduce the risk of equipment failure and consequent downtimes. When it comes to monitoring your bucket elevators and belt conveyors, 4B can recommend you the ideal combination of sensors and monitoring systems to suit your requirements and budget.

    4B provides an extensive range of their own ATEX / IECEx / CSA approved hazard monitoring systems, misalignment switches and bearing temperature monitors and level controls. We can offer you anything from a replacement sensor to a fully integrated hazard monitoring system which can be operated either as a stand-alone system or connected to your PLC.

    And if you do not want to install hazard monitoring sensors on every piece of equipment in your plant straightaway, we can offer you a scalable solution starting with carefully chosen equipment and systems that can be expanded at a later date to encompass other machines in the plant.

    We can also offer you an installation service, and we do provide a competent after-sales technical service to help you overcome any technical problems with your monitoring equipment.

    To get a recommendation from our engineers, please fill in the electronics questionnaire below. Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively.

    Preventative maintenance can help reduce the risk of equipment failure and consequent downtimes. When it comes to monitoring your bucket elevators and belt conveyors, 4B can recommend you the ideal combination of sensors and monitoring systems to suit your requirements and budget.

    4B provides an extensive range of their own ATEX / IECEx / CSA approved hazard monitoring systems, misalignment switches and bearing temperature monitors and level controls. We can offer you anything from a replacement sensor to a fully integrated hazard monitoring system which can be operated either as a stand-alone system or connected to your PLC.

    And if you do not want to install hazard monitoring sensors on every piece of equipment in your plant straightaway, we can offer you a scalable solution starting with carefully chosen equipment and systems that can be expanded at a later date to encompass other machines in the plant.

    We can also offer you an installation service, and we do provide a competent after-sales technical service to help you overcome any technical problems with your monitoring equipment.

    To get a recommendation from our engineers, please fill in the electronics questionnaire below. Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively.

    Contact Details

    Elevator Information

    Monitoring Requirements (Check All that Apply):

    Conveyor Information

    Monitoring Requirements (Check all that Apply):

    Silo/ Bin Information

    Monitoring Requirements (Check all that Apply):

    If you would like to send us a technical drawing or document with your enquiry, please send to 4b-uk@go4b.com.

    CAPTCHA
    This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.