Cangilón Atlas AA en Nylon
Cangilón Heavy Duty para aplicaciones industriales
AA43TN, AA54TN, AA64TN, AA74TN, AA75TN, AA85TN, AA96TN, AA106TN, AA116TN, AA126TN, AA127TN/S, AA127TN, AA147TN, AA148TN, AA168TN, AA188TN, AA1810TN

Cangilones en nylon endurecidos y resistentes. Tipo "AA" y "Continuous" nylon resistente moldeado e inyectado.

Cangilón Atlas AA en Nylon
Product Features
  • Construcción sólida: fabricado por DuPont 'Zytel' ST nylon, poliuretano o HDP superduros
  • Completamente sólido: Sin oclusiones en la estructura (molde inyectado para alcanzar una correcta uniformidad)
  • Resistente a la corrosión y a la abrasión
  • Para aplicaciones entre -50°C y 150°C
  • Para materiales diversos: arena, agregados, cemento, carbón, azúcar, fertilizantes, sal, vidrio/cristal
  • Disponible también en grado alimenticio FDA o en nylon para cumplir con las normas USDA y FDA




 

Cangilón Atlas AA en Nylon - drawing
Atlas AA bucket Nominal size A B C D T X Weight Capacity (L) Capacity (L)
(mm) (mm) (mm) (mm) (mm) (mm) (Deg) (kg) Z2 (total) Z3 (water)
AA43TN 110 x 80 103 78 78 51 5.2 37 0.09 0.27 0.21
AA54TN 130 x 100 134 105 105 74 5.2 37 0.23 0.74 0.57
AA64TN 150 x 100 160 105 105 74 5.2 37 0.27 0.89 0.68
AA74TN 180 x 100 184 105 105 74 5.7 37 0.3 1.07 0.84
AA75TN 180 x 130 180 130 134 93 8.3 37 0.44 1.55 1.26
AA85TN 200 x 130 206 130 134 93 8.3 37 0.5 1.83 1.47
AA95TN 230 x 130 232 130 134 93 8.1 37 0.54 2 1.66
AA96TN 230 x 150 238 156 156 108 7.4 37 0.67 2.8 2.17
AA106TN 250 x 150 264 156 156 108 8.2 37 0.73 3.14 2.43
AA116TN 280 x 150 290 156 156 108 7.2 37 0.77 3.43 2.68
AA126TN 300 x 150 320 165 160 108 8.8 38 0.95 4.1 3.08
AA127TN/S 300 x 180 305 178 178 98 7 37 0.92 4.1 2.95
AA127TN 300 x 180 314 180 180 125 7.2 37 1.13 5.25 4
AA147TN 350 x 180 365 180 180 125 7.6 37 1.25 6.3 4.89
AA148TN 350 x 200 365 206 206 142 11.6 37 1.94 7.6 5.76
AA168TN 400 x 200 416 206 206 142 11.6 37 2.1 8.85 6.66
AA188TN 450 x 200 460 206 206 142 11.6 37 2.38 10.15 7.66
AA1810TN 450 x 250 460 258 258 168 11.8 37 3.6 14.8 11

Agujeros de fijación y venteo según medidas del cliente.

FAQ - Elevator Buckets

FAQ - Elevator Buckets

What is a HIGH EFFICIENCY elevator bucket?  
HIGH EFFICIENCY elevator buckets incorporate all five of the following characteristics: a smooth interior front face with no "breaks", wing-less side walls, close vertical placement on the elevator belt, a tapered bottom and the ability to nest for shipping and storage.  For more details, CLICK HERE  
     
Why use Low Profile elevator buckets?  
Low profile elevator buckets are created to achieve the closest vertical spacing possible on the elevator belt, thereby optimizing the system for the greatest potential capacity.  Some styles of elevator bucket require modification and others are low profile by standard design.  Wet or sluggish inputs do not generally load and discharge well in low profile buckets.  Due to the extra capacity that is generated and the weight of the additional buckets and material, belt PIW rating, pulley shaft diameters and motor HP may have to be upgraded.  Check with 4B engineering department about the best way to get the most capacity out of your elevator leg.  
     
Why add vent holes to the bottom of an elevator bucket?  
When elevating fluffy or powdery materials, vent holes in the bottom of the elevator bucket allow it to fill and discharge more efficiently.  As material enters the bucket, it encounters a pillow of air resting in the bottom.  Vent holes provide an escape path for this pillow of air, so that the entering material does not bounce out of the bucket and back down the elevator leg casing.  Upon discharge, the vent holes allow air to re-enter the bucket at the material exits, releasing any vacuum that might hold it the bucket too long, creating down legging.  
     
Are CC style elevator buckets interchangeable with Starco elevator buckets?  
Starco elevator buckets have a special shallow geometry and are intended to be placed extremely close together on the elevator belt.  Therefore, you should check with the 4B engineering department before replacing Starco elevator buckets with any other brand or design.  
     
How long of an elevator bolt do I need?  
When installing buckets on an elevator belt, use this simple formula: 
(belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
     
 

What is a "digger" bucket?  
Some materials can form a hardened crust along the side wall of the elevator boot, and powders sitting over time can become rock hard.  Both of these issues can cause premature elevator bucket wear.  Digger buckets are designed to have slightly more width and projection than standard buckets, thereby "digging" through or breaking apart the hardened material, helping to prevent added wear to the standard buckets.  Digger buckets are traditionally made from steel, however nylon buckets may also be used depending on the application.  
     
How many digger buckets do I need?  
For most applications, use one digger bucket for every nine standard buckets.  
     
Can I use buckets on an overlap splice?  
An overlap splice doubles the thickness of the belt, so a bucket's projection will increase on the overlap.  Usually this will not cause a problem, but if it does, you can use buckets with one inch less projection or cut the tip of each bucket by half an inch on the spliced area.  
     
When using an overlap splice, how much extra belt should I use for the splice?  
The length of the splice should be three times the width of the belt.  
     
How often should I replace head pulley lagging?  
Lagging should be replaced every time the elevator belt is replaced.

Diseño de elevadores

Diseño de elevadores

Hemos diseñado cientos de elevadores de cangilones para todas las industrias, incluyendo la alimentación animal, manejo de granos, harina,..  hasta cemento, carbón y otras industrias pesadas. 

Aproveche de nuestro soporte técnico totalmente garantizado que ofrecemos asistido por un equipo de ingenieros especializado en diseños de elevadores y transportadores. Podemos ayudarlo tanto, para elevadores nuevos, como para aumentar la capacidad de equipos existentes:

Para obtener un cálculo elevador de cangilones libre

llena la información abajo y le contestaremos a la brevedad.

Hemos diseñado cientos de elevadores de cangilones para todas las industrias, incluyendo la alimentación animal, manejo de granos, harina,..  hasta cemento, carbón y otras industrias pesadas. 

Aproveche de nuestro soporte técnico totalmente garantizado que ofrecemos asistido por un equipo de ingenieros especializado en diseños de elevadores y transportadores. Podemos ayudarlo tanto, para elevadores nuevos, como para aumentar la capacidad de equipos existentes:

Para obtener un cálculo elevador de cangilones libre

llena la información abajo y le contestaremos a la brevedad.

Contacto

Caracteristas del elevador

If you would like to send us a technical drawing or document with your enquiry, please send to 4b-uk@go4b.com.

CAPTCHA
Esta pregunta es para comprobar si usted es un visitante humano y prevenir envíos de spam automatizado.
Diseño GRATIS

Obtener un cálculo elevador de cangilones libre