Euro Bolts

Elevator Bolts made to approx. DIN 15237

EURO elevator bolts have a concave head and two lugs on the underside to help prevent rotation when tightening. The Euro elevator bolts are intended for the attachment of pressed steel elevator buckets incorporating recessed bolt holes. The recessed area surrounding the bolt hole is intended to accommodate the similarly domed surface under the bolt head. 

  • For steel elevator buckets with recessed holes - use Euro Bolt with large domed washer
  • For steel buckets with flat holes - use Euro Bolt and small flat washer
  • For plastic elevator buckets - use Euro Bolt and large flat washer
Euro Elevator Bolts (approx. DIN 15237)
Product Features: 
  • Steel / Stainless steel 304 & 316
  • Actual min core hardness 90-95 Rockwell B
  • ISO grade 5.8 (exceeds DIN 15237)
  • Large bolt head diameter
  • Fully threaded
  • Zinc plated as standard or stainless
  • Bolt types: M6, M7, M8, M10, M12
  • Cruciform head available on request
Euro
bolts
Size
(mm)
Head Diameter
(mm)
Max. Torque
(Nm)
Package Quantity
Package Weight
(kg)
M6 x 202181001.28
M6 x 252181001.38
M6 x 302181001.50
M7 x 2023131001.82
M7 x 2223131001.94
M7 x 2523131002.10
M7 x 3023131002.16
M7 x 3523131002.22
M8 x 2028201002.98
M8 x 2228201002.00
M8 x 2528201003.00
M8 x 3028201003.02
M8 x 3528201003.37
M8 x 4028201003.72
M8 x 4528201003.88
M8 x 5028201003.94
M10 x 2535361005.42
M10 x 3035361005.43
M10 x 3535361005.44
M10 x 4035361005.84
M10 x 4535361006.02
M10 x 5035361006.18
M12 x 40*42651009.24
M12 x 50*42651004.96**
M12 x 60*42651005.36**
M12 x 70*42651005.60**

* Not available in stainless steel.

FAQ - Elevator Bolts

How long of an elevator bolt do I need?  
  When installing buckets on an elevator belt, use this simple formula:  
  (belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
     
What grade are 4B elevator bolts?  
  4B elevator bolts meet or exceed ISO Grade 5.8 / SAE Grade 2 standards.  The bolt grade guide below is for bolt diameters of 6mm (1/4") to 12mm (1/2"):  
     
BOLT GRADE GUIDE:

ISO Grade SAE Grade Min. Tensile Strenghth (psi)
5.8 2 74000
8.8 5 120000
10.9 8 150000


What torque setting should I use?  
  An ideal installation will result in the elevator bolt head fitting snuggly just below the surface of the belt after tightening (Image B).  However, never exceed the maximum recommended torque as shown in the tables below:  
     
MAXIMUM RECOMMENDED TORQUE FOR 4B ELEVATOR BOLTS METRIC ISO GRADE 5.8

Bolt Dia. in. lbs. ft. lbs. nm
M6 72 6 8
M7 115 10 13
M8 168 14 19
M10 336 28 38
M12 588 49 66


MAXIMUM RECOMMENDED TORQUE FOR 4B ELEVATOR BOLTS SAE GRADE 2 OR 302 STAINLESS STEEL

bolt dia. in. lbs. ft. lbs nm
1/4" 72 6 8
5/16" 156 13 18
3/8" 276 23 31
1/2" 684 57 77

 

How do you install an elevator bolt?  
  The head of the elevator bolt should lie against the inside surface of the elevator belt with the nuts and washers on the inside of the elevator bucket.  An ideal installation will result in the elevator bolt head fitting snuggly just below the surface of the elevator belt.    
     
           


     
  Do you have any maintenance recommendations?  
  After initial installation, it is recommended that the bucket elevator be run for approximately four hours.  After which the bolts should be re-tightened to ensure that there are no loose parts.  Periodic inspections are always recommended to  check for any issues that may occur during the life of the elevator, including checks for loose or damaged elevator bolts.  

Euro Bolt
Euro Bolt - configuration for metal buckets
Euro Bolt - configuration for metal buckets (flat holes)
euro bolt Din15237 - configuration for plastic buckets

Bucket Elevator Design Service

Bucket Elevator Design Service

At 4B, we have designed hundreds of bucket elevators for all industries, including Animal Feed, Grain Handling, Flour Milling, Malting & Brewing through to Cement, Coal and other heavy industries.

Take advantage of 4B's free, guaranteed worldwide technical support service from a team of engineers specialising in the design and calculation of bucket elevators.. Using your key technical data, our engineers can give you a detailed technical recommendation for the ideal bucket elevator with the ideal capacity and discharge characteristics. We can either design your new bucket elevator or we can help you to increase the capacity of your existing bucket elevator.

To get a free bucket elevator calculation

Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively. - For dimensions please specify mm or inches.

Contact Details

Elevator Details

If you would like to send us a technical drawing or document with your enquiry, please send to 4b-uk@go4b.com.

Elevator Bolts Catalogue

View our complete catalogue