Auto-Set™ Remote
Radio Frequency (RF) Capacitance Point Level Indicator
ATSR1V0A

The Auto-Set Remote series RF capacitance point level monitors are designed for high temperature (250°C) or vibration applications to detect high, intermediate, or low levels of liquids, powders and free flowing granular solids stored in tanks, bins, silos or other containers.

The Auto-Set Remote has a din rail mounted remote control unit with simple push-button calibration. The remote control unit connects to the transducer, which is mounted in a suitable enclosure close to the probe. For applications below 120° C or without any vibration, the transducer can be mounted within the polypropylene probe housing. Once the Auto-Set Remote is calibrated for the application it never has to be re-calibrated. Data is stored in non-volatile memory so it is not affected by power loss. A four digit LED display shows set values for uncovered, covered and trip settings, allowing simple set-up and adjustment. A set of voltage-free changeover relay contacts are actuated when the level of the material in the container reaches the probe. The unit incorporates a unique power shield which automatically compensates for material build-up around the probe and on the sides of the container, preventing false indication. The Auto-Set Remote is top or side mountable with stainless steel probes lengths up to 10m long, and can be used with container walls up to 7.5cm thick.

Remote Autoset RF level sensor
Product Features
  • High and Low Level Indication
  • Ideal for High temperature and Vibration Applications
  • Fail-Safe and Push Button Calibration
  • Digital Display and Internal Timer
  • Power Shield Compensates for Material Build Up
  • Probes up to 10m Length Available
Certification

CE

CE
Bild
CE Logo

CSA

CSA
Bild
CSA logo
    Literature Downloads

    Can the Auto-Set™ remote probes be side or top mounted?  
      Yes, they can be top or sided mounted.

    What does the Power Shield do?
    The power shield creates a barrier and enables the unit to ignore material built up on the probe, preventing false readings.  The Auto-Set remote probes have 3-7/8 inch power shields, and can be used with walls up to 3 inches thick.